Are you looking for the Kaduna Polytechnic cut-off mark for the 2026/2027 academic session?
Do you want to know the JAMB score needed to study Accountancy, Computer Science, Mass Communication, Business Administration, Engineering, or any other course at Kaduna Polytechnic?
If so, this article gives you the details you need to get ready for admission into Kaduna Polytechnic (KADPOLY) for the 2026/2027 academic session.
Kaduna Polytechnic is one of Nigeria’s well-known federal polytechnics. It offers National Diploma (ND), Higher National Diploma (HND), NCE, and other approved programmes in different academic areas.
For the 2026/2027 admission, the national minimum JAMB score for polytechnics is 100.
But meeting this score does not guarantee admission. Each programme may have its own requirements, and factors like your O-level results and available spaces can affect your chances.
This guide covers the Kaduna Polytechnic JAMB cut-off mark, departmental requirements, available courses, eligibility, screening steps, and answers to common questions.
Kaduna Polytechnic Cut Off Mark for 2026/2027
Contents
The general JAMB cut-off mark applicable to polytechnics for the 2026/2027 academic session is 100 and above.
This means that candidates who scored at least 100 in the 2026 UTME may meet the national minimum score for Kaduna Polytechnic’s eligible programmes.
The 2026 JAMB policy meeting approved 100 as the minimum tolerable score for polytechnics, monotechnics, colleges of agriculture and colleges of education.
However, the national minimum is not the same as a guaranteed departmental admission score.
Kaduna Polytechnic may set extra requirements based on the programme and admission type.
Kaduna Polytechnic Cut-Off Mark for All Courses 2026/2027
Kaduna Polytechnic offers programmes in engineering, management, environmental studies, applied sciences, technology, communication and other disciplines.
For National Diploma applicants, the general JAMB benchmark is 100.
Here are some of the programmes the institution offers:
| S/N | Courses | General JAMB benchmark |
|---|---|---|
| 1 | Accountancy | 100 |
| 2 | Agricultural Technology | 100 |
| 3 | Agricultural and Bio-Environmental Engineering Technology | 100 |
| 4 | Architectural Technology | 100 |
| 5 | Banking and Finance | 100 |
| 6 | Building Technology | 100 |
| 7 | Business Administration and Management | 100 |
| 8 | Cartography and Geographic Information System | 100 |
| 9 | Chemical Engineering Technology | 100 |
| 10 | Civil Engineering Technology | 100 |
| 11 | Computer Engineering Technology | 100 |
| 12 | Computer Science | 100 |
| 13 | Cooperative Economics and Management | 100 |
| 14 | Crime Management | 100 |
| 15 | Electrical/Electronic Engineering Technology | 100 |
| 16 | Environmental Science and Management Technology | 100 |
| 17 | Estate Management and Valuation | 100 |
| 18 | Fashion Design and Clothing Technology | 100 |
| 19 | Food Science and Technology | 100 |
| 20 | Foundry Engineering Technology | 100 |
| 21 | Hospitality Management Technology | 100 |
| 22 | Industrial and Labour Relations | 100 |
| 23 | Industrial Safety and Environmental Engineering Technology | 100 |
| 24 | Library and Information Science | 100 |
| 25 | Local Government Studies | 100 |
| 26 | Marketing | 100 |
| 27 | Mass Communication | 100 |
| 28 | Mechanical Engineering Technology | 100 |
| 29 | Mechatronics Engineering Technology | 100 |
| 30 | Metallurgical Engineering Technology | 100 |
| 31 | Mineral and Petroleum Resources Engineering Technology | 100 |
| 32 | Nutrition and Dietetics | 100 |
| 33 | Office Technology and Management | 100 |
| 34 | Petroleum and Gas Processing Engineering Technology | 100 |
| 35 | Photogrammetry and Remote Sensing | 100 |
| 36 | Polymer Technology | 100 |
| 37 | Procurement and Supply Chain Management | 100 |
| 38 | Psychosocial Rehabilitation | 100 |
| 39 | Public Administration | 100 |
| 40 | Quantity Surveying | 100 |
| 41 | Railway Engineering Technology | 100 |
Note: The figures above show the national minimum JAMB benchmark for polytechnic admission, not specific departmental cut-off marks.
Candidates should check the requirements for their chosen programmes through the institution’s official admission channels before applying.
The National Board for Technical Education (NBTE) maintains an updated register of Kaduna Polytechnic’s accredited programmes.
Kaduna Polytechnic Departmental Cut Off Mark 2026/2027
Many applicants want to know the departmental cut-off mark for their chosen course before they apply.
A departmental cut-off mark is the minimum score needed for a specific programme.
It can be different from the general JAMB benchmark.
For the 2026/2027 academic session, Kaduna Polytechnic has not released an official list of its departmental merit cut-off marks.
So, applicants should be cautious about websites that publish specific departmental scores without an official announcement from the institution.
Although the national minimum is 100, some programmes may be more competitive because of the number of applicants and limited spaces.
Candidates applying for Computer Science, Mass Communication, Accountancy, and Engineering programmes should pay close attention to the admission requirements for their chosen courses.
Kaduna Polytechnic Cut-off Mark for NCE Programmes
Kaduna Polytechnic also offers NCE-related programmes.
For the 2026/2027 academic session, the national minimum JAMB benchmark for colleges of education is 100.
However, candidates should check the specific entry requirements for their chosen NCE programme.
Some programmes may need certain O-level subjects, while others may have extra admission conditions.
Kaduna Polytechnic Cut-off Mark for Affiliated Degree Programmes
Kaduna Polytechnic also offers degree programmes through partnerships with universities.
These programmes are different from the institution’s regular National Diploma programmes.
The published 2026/2027 admission information reported by Allschool indicates the following benchmarks:
- KADPOLY-FUTMINNA affiliated degree programmes: 150 and above.
- KADPOLY-ABU Zaria affiliated degree programmes: 150 and above.
Some of the reported affiliated programmes include:
FUTMINNA-affiliated programmes:
- Cartography and Geographic Information System.
- Industrial Education Technology.
- Photogrammetry and Remote Sensing.
- Psychosocial Rehabilitation.
ABU Zaria-affiliated programmes:
- Architecture.
- Building.
- Chemical Engineering.
- Civil Engineering.
- Electrical Engineering.
- Mechanical Engineering.
- Urban and Regional Planning.
Candidates should check these figures with the latest admission notice for the relevant affiliated programme before changing their JAMB choices.
Kaduna Polytechnic Admission Requirements for 2026/2027
Candidates seeking admission to Kaduna Polytechnic must meet the required admission conditions.
The general requirements include:
1. JAMB UTME score
Candidates applying for ND programmes through UTME must participate in the 2026 JAMB examination and meet the applicable admission benchmark.
2. O’level requirements
Applicants are usually expected to have five relevant credit passes in WAEC, NECO, NABTEB, or other recognised exams.
The required subjects depend on the selected programme.
3. Correct subject combination
Candidates must make sure their UTME subject combination matches the requirements of their chosen course.
For example, engineering and science-related programmes may require Mathematics, Physics and Chemistry, while management programmes may have different subject requirements.
4. Correct JAMB institution and course selection
Candidates should choose Kaduna Polytechnic and the right programme when filling out their JAMB registration, or make corrections through JAMB’s approved process if needed.
5. Meet the institution’s screening conditions
Applicants must follow the screening, application, and documentation instructions Kaduna Polytechnic provides for the 2026/2027 session.
How to Calculate Your Chances of Gaining Admission into Kaduna Polytechnic
While meeting the minimum JAMB cut-off mark is important, candidates should also pay attention to other admission requirements.
For example, a candidate who scores 160 in UTME and has the required five O-level credits may satisfy the basic requirements for consideration.
However, this does not guarantee that the candidate will be admitted.
The institution may consider the following:
- JAMB score.
- O-level grades.
- Programme-specific subject requirements.
- Available admission spaces.
- Fulfilment of screening conditions.
- Other admission guidelines.
Candidates should also ensure their personal information and academic records match across all admission documents.
Is Kaduna Polytechnic Cut-off Mark 100 for 2026/2027?
Yes. The national minimum tolerable admission score approved for polytechnics for the 2026/2027 academic session is 100.
However, applicants must still meet Kaduna Polytechnic’s specific programme requirements.
What Should I Do If My JAMB Score Is Below 100?
Candidates who scored below 100 may not meet the current national minimum for polytechnic admission through UTME.
Such candidates should watch for JAMB announcements and think about their options for the next admission round.
Do not pay anyone who promises to increase your JAMB score or secure admission for you through unofficial means.
How to Check Kaduna Polytechnic Admission List
After finishing the admission application and screening, candidates should check the institution’s official admission updates.
Usually, applicants can follow these steps:
- Visit the official Kaduna Polytechnic website.
- Locate the admission or application section.
- Follow the instructions for the 2026/2027 admission exercise.
- Log in with the required application details where applicable.
- Check whether your admission status has been updated.
- Follow any instructions provided for acceptance and registration.
Candidates should also check their admission status on the JAMB CAPS portal, if applicable.
Important Advice for Kaduna Polytechnic Aspirants
If you want admission into Kaduna Polytechnic in 2026/2027, don’t rely only on your JAMB score.
Make sure your O-level results meet the requirements for your chosen course.
Also, check that your subject combination is correct before you finish your application.
Don’t rely on unofficial departmental cut-off mark tables, especially if the institution has not published them.
Admission requirements can change, so always check the latest updates from Kaduna Polytechnic and JAMB.
Frequently Asked Questions About Kaduna Polytechnic Cut-off Mark 2026/2027
1. What is Kaduna Polytechnic cut-off mark for 2026/2027?
The national minimum JAMB benchmark for polytechnics for the 2026/2027 academic session is 100.
Candidates must also meet the institution’s specific admission requirements.
2. Can I gain admission into Kaduna Polytechnic with 120 in JAMB?
Yes, a JAMB score of 120 is above the national minimum of 100 for polytechnics.
However, admission depends on your O-level results, preferred programme and other screening requirements.
3. Does Kaduna Polytechnic accept 100 in JAMB?
The national minimum benchmark for polytechnics is 100.
However, meeting this minimum does not automatically guarantee admission into every programme.
4. What is the cut-off mark for Computer Science at Kaduna Polytechnic?
The national minimum JAMB benchmark applicable to Kaduna Polytechnic’s ND programmes is 100.
Kaduna Polytechnic has not officially confirmed a separate departmental cut-off mark for Computer Science.
5. What is Kaduna Polytechnic’s cut-off mark for Mass Communication?
Candidates applying for ND Mass Communication should meet the general polytechnic JAMB benchmark of 100 and satisfy the programme’s other admission requirements.
6. Does Kaduna Polytechnic accept second-choice candidates?
Candidates should check the current admission application instructions and JAMB requirements to establish whether their application category is accepted.
Do not assume that every admission category is automatically eligible.
7. Does Kaduna Polytechnic offer Computer Engineering?
Yes. The institution offers a National Diploma in Computer Engineering Technology and a Higher National Diploma in Computer Engineering Technology.
8. What is the difference between Kaduna Polytechnic ND and HND programmes?
The National Diploma is generally the first level of polytechnic education.
The Higher National Diploma is an advanced qualification that candidates pursue after completing ND and meeting the relevant entry requirements.
9. Can I apply for Kaduna Polytechnic without JAMB?
Admission routes differ by programme.
Candidates applying for regular ND admission through UTME should follow JAMB requirements.
Applicants interested in other programmes should check the specific admission notice.
10. Has Kaduna Polytechnic released its 2026/2027 departmental cut-off marks?
A complete official list of departmental merit cut-off marks has not been independently verified.
Candidates should rely on official institutional announcements rather than unconfirmed figures circulating online.
Conclusion
The Kaduna Polytechnic cut-off mark for the 2026/2027 academic session is an important requirement for anyone seeking admission.
The national minimum JAMB benchmark for polytechnics is 100, while affiliated degree programmes may have different requirements.
Applicants should also know that meeting the minimum score does not guarantee admission.
O-level results, subject combinations, programme requirements, and available spaces are still important.
We advise all prospective students to check Kaduna Polytechnic’s official website and JAMB CAPS regularly for reliable admission updates.
Accountancy cut off mark please
My course cut of mark was not mentioned in the list
My course cut of mark was not mentioned in the list
Place I score 130 in my jamb and I want to study public admission in Kaduna polytechnic and I made Kaduna polytechnic as my second choice place we I get admission
If someone score 130 in jamb can the person go for public admission in Kaduna polytechnic. Place I need the correct answer pls
Science laboratory and technology cutoff mark!!
Pls my jamb score is 170
And I apply computer science
And no any admission is been given to me pls I want to know the cut of mark
My gamb score is 166 and I apply for computer science and I made kadpoly my second choice please can I get admission